HIKVISION UD00543B User Manual page 33

UDP: Provides real-time audio and video streams.
HTTP: Allows the same quality as of TCP without setting specific ports for
streaming under some network environments.
MULTICAST: It's recommended to select MCAST type when using the
Multicast function. For detailed information about Multicast, refer to Section
6.1.1 Configuring TCP/IP Settings.
 Play Performance: Set the play performance to Shortest Delay or Auto.
 Rules: It refers to the rules on your local browser, select enable or disable to
display or not display the colored marks when the motion detection is
triggered. E.g.: If motion detection and rules are both enabled, when a moving
object is detected, it will be marked with a green rectangle on the live video.
 Image Format: Choose the image format for picture capture.

Record File Settings: Set the saving path of the recorded video files. Valid for the
record files you recorded with the web browser.
 Record File Size: Select the packed size of the manually recorded and
downloaded video files to 256M, 512M or 1G. After the selection, the
maximum record file size is the value you selected.
 Save record files to: Set the saving path for the manually recorded video files.
 Save downloaded files to: Set the saving path for the downloaded video files
in playback mode.

Picture and Clip Settings: Set the saving paths of the captured pictures and
clipped video files. Valid for the pictures you capture with the web browser.
 Save snapshots in live view to: Set the saving path of the manually captured
pictures in live view mode.
 Save snapshots when playback to: Set the saving path of the captured
pictures in playback mode.
 Save clips to: Set the saving path of the clipped video files in playback mode.
Note: You can click Browse to change the directory for saving the clips and pictures.
3. Click Save to save the settings.
Network Multi-Sensor Panoramic Dome Camera
33