Display Settings; Image Adjustment; Image Adjustment (Thermal Channel) - HIKVISION DS-2TD2528T-10/Q User Manual

Thermal & Optical Bi-spectrum Network Camera User Manual

9.2 Display Settings

It offers the parameter settings to adjust image features.
Go to Configuration → Image → Display Settings.
For device that supports multiple channels, display settings of each channel is required. The
settings for different channels may be different. This part introduces all possible parameters
among the channels.
Click Default to restore settings.

9.2.1 Image Adjustment

By adjusting the Brightness, Saturation, Hue, Contrast and Sharpness, the image can be best
displayed.

9.2.2 Image Adjustment (Thermal Channel)

You can optimize the image display effect of thermal channel by manual correction.
Manual Correction
Click DPC (Defective Pixel Correction) to optimize the image once.
Note
It is a normal phenomenon that short video freezing might occur during the process of Manual
Correction.
Thermal AGC Mode
Choose the AGC mode according to different scenes to balance and improve the image quality.
● Histogram: Choose for scene with obvious WDR and high temperature difference, can
improve image contrast and enhance image. E.g. the scene contains both indoor and outdoor
scenes.
Figure 9-1 Saturation
44