Log - HIKVISION UD00543B User Manual

start importing configuration file.
Note: You need to reboot the camera after importing configuration file.
 Upgrading the System
Click Browse to select the local upgrade file and then click Upgrade to start
remote upgrade.
Note: The upgrading process will take 1 to 10 minutes. Please don't disconnect
power of the camera during the process. The camera reboots automatically after
upgrading.

5.3.2 Log

Purpose:
The operation, alarm, exception and information of the camera can be stored in log
files. You can also export the log files on your demand.
Before you start:
Please configure network storage for the camera or insert a memory card in the
camera.
Steps:
1. Enter log searching interface: Configuration > System > Maintenance > Log.
2. Set the log search conditions to specify the search, including the Major Type,
Minor Type, Start Time and End Time.
3. Click Search to search log files. The matched log files will be displayed on the
log list interface.
Network Multi-Sensor Panoramic Dome Camera
Figure 5-13 Log Searching Interface
43