Table of Contents
Advertisement
4. Click Save to save the settings.
5. Go to Capture Parameters tab to configure the capture parameters.
(1) Check the Enable Timing Snapshot checkbox to enable continuous
snapshot.
(2) Select the picture format, resolution, quality and capture interval.
(3) Check the Enable Event-triggered Snapshot checkbox to enable
event-triggered snapshot.
(4) Select the picture format, resolution, quality, capture interval, and capture
number.
6. Set the time interval between two snapshots.
7. Click Save to save the settings.
Network Multi-Sensor Panoramic Dome Camera
Figure 10-5 Set Capture Parameters
99
Advertisement
Table of Contents
