Displaying And Maintaining Link Aggregation; Link Aggregation Configuration Examples - H3C S5500-SI Series Operation Manual

Currently, when you configure load-balancing link aggregation groups in Layer 2 aggregate interface
view, the switch supports configuring hash keys in the following modes:
Use a source IP address, a source MAC address, or a destination MAC address alone as a hash
key.
Combine a destination MAC address and a source MAC address, a source IP address and a
destination IP address to form a hash key.

Displaying and Maintaining Link Aggregation

To do...
Display the local system ID
Display the aggregation
group-specific load sharing
mode
Display link aggregation details
of ports
Display the summary
information of all aggregation
groups
Display detailed information of
aggregation groups
Clear the LACP statistics of
ports

Link Aggregation Configuration Examples

In an aggregation group, the port to be a selected port must be the same as the reference port in port
attributes, and class-two configurations. To keep these configurations consistent, you should configure
the port manually.
Use the command...
display lacp system-id
display link-aggregation
load-sharing mode
display link-aggregation
member-port [ interface-type
interface-number [ to interface-type
interface-number ] ]
display link-aggregation
summary
display link-aggregation verbose
[ bridge-aggregation
[ interface-number ] ]
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
1-11
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view