Displaying And Maintaining Qos Policies - H3C S5500-SI Series Operation Manual

If a user profile is active, the QoS policy, except ACLs referenced in the QoS policy, applied to it
cannot be configured or removed. If the user profile is being used by online users, the referenced
ACLs cannot be modified either.
The QoS policies applied in user profile view support only the remark, car, and filter actions.
Do not apply an empty policy in user profile view because a user profile with an empty policy
applied cannot be activated.
Applying the QoS policy to a VLAN
You can apply a QoS policy to a VLAN to regulate traffic of the VLAN.
Follow these steps to apply the QoS policy to a VLAN:
To do...
Enter system view
Apply the QoS policy to VLANs
QoS policies cannot be applied to dynamic VLANs, for example, VLANs created by GVRP.
Do not apply a QoS policy to a VLAN and the ports in the VLAN at the same time.

Displaying and Maintaining QoS Policies

To do...
Display information about a
class and the corresponding
actions associated by a policy
Display information about the
policies applied on a port
Display information about a
traffic behavior
Display information about a
class
Display information about QoS
policies applied to VLANs
Clear the statistics of QoS
policies applied to VLANs
Use the command...
system-view
qos vlan-policy policy-name
vlan vlan-id-list inbound
Use the command...
display qos policy
user-defined [ policy-name
[ classifier classifier-name ] ]
display qos policy interface
[ interface-type
interface-number ] [ inbound ]
display traffic behavior
user-defined
[ behavior-name ]
display traffic classifier
user-defined
[ classifier-name ]
display qos vlan-policy
{ name policy-name | vlan
[ vlan-id ] } [ inbound ]
reset qos vlan-policy [ vlan
vlan-id ] [ inbound ]
2-7
Remarks
—
Required
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view