H3C S5500-SI Series Operation Manual page 128

[SwitchA-GigabitEthernet1/0/1] lldp admin-status txrx
[SwitchA-GigabitEthernet1/0/1] lldp compliance admin-status cdp txrx
[SwitchA-GigabitEthernet1/0/1] quit
[SwitchA] interface gigabitethernet 1/0/2
[SwitchA-GigabitEthernet1/0/2] lldp enable
[SwitchA-GigabitEthernet1/0/2] lldp admin-status txrx
[SwitchA-GigabitEthernet1/0/2] lldp compliance admin-status cdp txrx
[SwitchA-GigabitEthernet1/0/2] quit
3) Verify the configuration
# Display the neighbor information on Switch A.
[SwitchA] display lldp neighbor-information
CDP neighbor-information of port 1[GigabitEthernet1/0/1]:
CDP neighbor index : 1
Chassis ID
Port ID
Sofrware version
Platform
Duplex
CDP neighbor-information of port 2[GigabitEthernet1/0/2]:
CDP neighbor index : 2
Chassis ID
Port ID
Sofrware version
Platform
Duplex
As the sample output shows, Switch A has discovered the IP phones connected to GigabitEthernet
1/0/1 and GigabitEthernet 1/0/2, and has obtained their LLDP device information.
: SEP00141CBCDBFE
: Port 1
: P0030301MFG2
: Cisco IP Phone 7960
: Full
: SEP00141CBCDBFF
: Port 1
: P0030301MFG2
: Cisco IP Phone 7960
: Full
1-17