Configuring A Guest Vlan; Configuration Prerequisites; Configuration Procedure - H3C S5500-SI Series Operation Manual

To do...
Set the quiet timer
Set the server timeout
timer
Configure the username
and password for MAC
authentication
You can configure MAC authentication for ports first. However, the configuration takes effect only
after you enable MAC authentication globally.
Enabling MAC authentication on a port is mutually exclusive with adding the port to an aggregation
group.
For details about the default ISP domain, refer to AAA Configuration in the Security Volume.

Configuring a Guest VLAN

Configuration Prerequisites

Enable MAC authentication.
Enable MAC VLAN on the port.
Create the VLAN to be specified as the guest VLAN.

Configuration Procedure

Follow these steps to configure an MGV:
To do...
Enter system view
Enter Ethernet interface
view
Configure an MGV for MAC
authentication
Use the command...
mac-authentication timer quiet
quiet-value
mac-authentication timer
server-timeout
server-timeout-value
mac-authentication
user-name-format { fixed
[ account name ] [ password
{ cipher | simple } password ] |
mac-address [ with-hyphen |
without-hyphen ] }
Use the command...
system-view
interface interface-type
interface-number
mac-authentication guest-vlan
guest-vlan-id
1-4
Remarks
Optional
60 seconds by default
Optional
100 seconds by default
Optional
By default, the user's source
MAC address serves as the
username and password,
without "-" in the MAC address.
Remarks
—
—
Required
Not configured by default