Ip Routing Volume - H3C S5500-SI Series Operation Manual

Hide thumbs Also See for S5500-SI Series:
Table of Contents

Advertisement

Features
Dual Stack
sFlow

IP Routing Volume

Table 3-3 Features in the IP Routing volume
Features
IP Routing Overview
Static Routing
RIP
IPv6 Static Routing
IPv6 RIPng
Routing Policy
A network node that supports both IPv4 and IPv6 is called a dual stack
node. A dual stack node configured with an IPv4 address and an IPv6
address can have both IPv4 and IPv6 packets transmitted. This document
describes:
Dual stack overview
Dual stack configuration
Based on packet sampling, Sampled Flow (sFlow) is a traffic monitoring
technology mainly used to collect and analyze traffic statistics. This
document describes:
sFlow Overview
sFlow Configuration
This document describes:
Introduction to IP routing and routing table
Routing protocol overview
A static route is manually configured by the administrator. The proper
configuration and usage of static routes can improve network
performance and ensure bandwidth for important network applications.
This document describes:
Static route configuration
Detecting Reachability of the Static Route's Nexthop
Routing Information Protocol (RIP) is a simple Interior Gateway Protocol
(IGP), mainly used in small-sized networks. This document describes:
RIP basic functions configuration
RIP advanced functions configuration
RIP network optimization configuration
Static routes are special routes that are manually configured by network
administrators. Similar to IPv4 static routes, IPv6 static routes work well in
simple IPv6 network environments. This document describes:
IPv6 static route configuration
RIP next generation (RIPng) is an extension of RIP-2 for IPv4. RIPng for
IPv6 is IPv6 RIPng. This document describes:
Configuring RIPng Basic Functions
Configuring RIPng Route Control
Tuning and Optimizing the RIPng Network
Routing policy is used on the router for route inspection, filtering,
attributes modifying when routes are received, advertised, or
redistributed. This document describes:
Defining Filters
Route policy configuration
3-4
Description
Description

Advertisement

Chapters

Table of Contents
loading

Table of Contents