H3C S5500-SI Series Operation Manual page 19

Features
SNMP
RMON
MAC Address Table
Management
System Maintenance
and Debugging
Information Center
PoE
Simple network management protocol (SNMP) offers a framework to
monitor network devices through TCP/IP protocol suite. This document
describes:
SNMP overview
Basic SNMP function configuration
SNMP log configuration
Trap configuration
MIB style configuration
RMON provides an efficient means of monitoring subnets and allows
SNMP to monitor remote network devices in a more proactive and
effective way. This document describes:
RMON overview
RMON configuration
A switch maintains a MAC address table for fast forwarding packets. This
document describes:
MAC address table overview
Configuring MAC Address Entries
Configuring the Aging Timer for Dynamic MAC Address Entries
Configuring the MAC Learning Limit
Configuring MAC Information
For the majority of protocols and features supported, the system provides
corresponding debugging information to help users diagnose errors. This
document describes:
Maintenance and debugging overview
Maintenance and debugging configuration
As the system information hub, Information Center classifies and
manages all types of system information. This document describes:
Information Center Overview
Setting to Output System Information to the Console
Setting to Output System Information to a Monitor Terminal
Setting to Output System Information to a Log Host
Setting to Output System Information to the Trap Buffer
Setting to Output System Information to the Log Buffer
Setting to Output System Information to the SNMP Module
Configuring Synchronous Information Output
Disabling a Port from Generating Link Up/Down Logging Information
The Power over Ethernet (PoE) feature enables the power sourcing
equipment (PSE) to feed powered devices (PDs) from Ethernet ports
through twisted pair cables. This document describes:
PoE overview
Configuring the PoE Interface
Configuring PoE power management
Configuring the PoE monitoring function
Online upgrading the PSE processing software
Configuring a PD Disconnection Detection Mode
Enabling the PSE to detect nonstandard PDs
3-10
Description