H3C S5500-SI Series Operation Manual page 11

Features
LLDP
VLAN
GVRP
QinQ
BPDU Tunneling
Port Mirroring
LLDP enables a device to maintain and manage its own and its immediate
neighbor's device information, based on which the network management
system detects and determines the conditions of the communications
links. This document describes:
Introduction to LLDP
Performing Basic LLDP Configuration
Configuring the Encapsulation Format for LLDPDUs
Configuring the Encapsulation Format of the Management Address
Configuring CDP Compatibility
Configuring LLDP Trapping
Using the VLAN technology, you can partition a LAN into multiple logical
LANs. This document describes:
Introduction to VLAN
Types of VLAN
Introduction and Configuration of Isolate-user-vlan
Introduction and Configuration of Voice VLAN
GVRP is a GARP application. This document describes:
GARP overview
GVRP configuration
GARP Timers configuration
As defined in IEEE802.1Q, 12 bits are used to identify a VLAN ID, so a
device can support a maximum of 4094 VLANs. The QinQ feature
extends the VLAN space by allowing Ethernet frames to travel across the
service provider network with double VLAN tags. This document
describes:
Introduction to QinQ
Configuring basic QinQ
Configuring Selective QinQ
Configuring the TPID Value in VLAN Tags
BPDU tunneling enables transparently transmission of customer network
BPDU frames over the service provider network. This document
describes:
Introduction to BPDU Tunneling
Configuring BPDU Transparent Transmission
Configuring Destination Multicast MAC Address for BPDU Tunnel
Frames
Port mirroring copies packets passing through a port to another port
connected with a monitoring device for packet analysis to help implement
network monitoring and troubleshooting. This document describes:
Port Mirroring overview
Local port mirroring configuration
Remote port mirroring configuration
3-2
Description