Low-Charge Battery Condition - Sea-doo GTX 4-TEC 6159 Operator's Manual

To ease access to the hose, the vent
tube can be temporarily removed.
F18E0OY
1. Vent tube
Lift lock tab and holding the tab, pull
the tube to release it.
1
F18E0PY
1. Lift lock tab
Then proceed with the tab under the
tube. Refer to the following illustration
to see it.
F18E0QY
1. Other lock tab under tube
68
1
1
www.SeaDooManuals.net
Snugly install the hose pincher on the
water supply hose as shown.
F18E0RY
TYPICAL
1. Hose pincher
CAUTION: When finished towing the
watercraft, hose pincher must be re-
moved before operating it. Failure to
do so will result in damage to the en-
gine.
After removal of hose pincher, proper-
ly reinstall and lock vent tube. When
pushing tube in place, you should hear
a click that validates it is locked.
Low-Charge Battery
Condition
See an authorized Sea-Doo dealer to
have it charged or replaced.
WARNING
Do not charge or boost the battery
while installed on the watercraft.
Electrolyte is poisonous and dan-
gerous. Avoid contact with eyes,
skin and clothing.
1