Advertisement
Removing the Chassis Cover
1. Make sure the system and all other peripheral devices
off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the bottom side
(labeled side) of the system are used to
secure the cover to the chassis. Remove
these screws and then put them in a safe
place for later use.
4. After removing the mounting screws, lift the
cover up.
5. The CFast socket, and Mini PCIe/mSATA slot are readily accessible after removing the chassis
cover. And the SIM slot is also accessible at the side of the system board.
CFast Socket
connected to it has been powered-
Mounting Screw
Lift the Cover Upward
2
PCIe x1, USB,
3G signal
mSATA
PCIe x1, USB,
Wi-Fi signal
SIM slot
Advertisement
