Table of Contents
Advertisement
7.
Secure the heat sink to the processor.
a.
Slide both plastic locking tabs into place. See callout 1 in the following figure.
b.
Flip the latch down. See callout 2 in the following figure.
WARNING!
on top of the lever during installation to avoid personal injury.
CAUTION:
the processor module from the processor heat sink after they have been coupled.
8.
Route and connect the power cord.
The heat sink locking lever can constitute a pinch hazard. Keep your hands
To prevent thermal instability and damage to the server, do not separate
Installing a processor
55
Advertisement
Table of Contents
Troubleshooting
