Input/Output Connectors - Mitsubishi FX3U-?*MR/ES User Manual

FX Series Programmable Controllers
3U
User's Manual - Hardware Edition
9.2.2

Input/output connectors

The input/output connectors of FX
function units/blocks (connector type) conform to MIL-C-83503.
Prepare the input/output cables, referring to the following tables.
1. Applicable products
Classification
Input/output extension blocks
Special function units/blocks
2. Preparation of input/output connectors
1) Compliant connectors (commercially available connectors)
Use 20-pin (1-key) or 40-pin (1-key) sockets conforming to MIL-C-83503.
In advance, make sure that no interference is caused with peripheral parts, such as the connector cover.
2) Input/output cables (our options)
Input/output cables with attached connectors are available.
The following input/output cables are intended to be used only for general purpose input and output
operations.
Model names
FX-16E-500CAB-S
FX-16E-150CAB
FX-16E-300CAB
FX-16E-500CAB
FX-16E-150CAB-R 1.5m(4'11")
FX-16E-300CAB-R
FX-16E-500CAB-R
FX-A32E-150CAB
FX-A32E-300CAB
FX-A32E-500CAB
3) Connectors for making input/output cables by users (our options)
The users should prepare the electric wires and pressure bonding tool.
Model name and composition of input/output connector
Our model name
FX -I/O-CON for
2C
flat cable
FX -I/O-CON-S
2C
for bulk wire
FX -I/O-CON-SA
2C
for bulk wire
FX-I/O-CON2-S
for bulk wire
(40 Pin)
FX-I/O-CON2-SA
for bulk wire
(40 Pin)
4) Certified connectors (commercially available connectors)
Connectors made by DDK Ltd. shown in item 3).
172
Series input/output extension blocks (connector type) and special
2N
FX -16EX-C, FX
2N
FX -20SSC-H, FX
3U
Length
5m(10'4") General-purpose input/output cable
1.5m(4'11")
Cables for connecting FX Series terminal
3m(9'10")
block and input/output connector
5m(10'4")
For the connection with FX Series terminal
block, refer to the following chapter.
3m(9'10")
5m(10'4")
1.5m(4'11")
3m(9'10")
Cables for connecting A Series Model
A6TBXY36 connector/terminal block
conversion unit and input/output connector
type
5m(10'4")
Details of part
(made by DDK Ltd.)
Solderless connector FRC2-
10-piece set
A020-30S
Housing HU-200S2-001
5-piece set
Solderless contact HU-411S AWG22 (0.3mm
Housing HU-200S2-001
5-piece set
Solderless contact HU-411SA AWG20 (0.5mm
Housing HU-400S2-001
2-piece set
Solderless contact HU-411S AWG22 (0.3mm
Housing HU-400S2-001
2-piece set
Solderless contact HU-411SA AWG20 (0.5mm
9 Preparation for Wiring and Power Supply Wiring Procedures
Model names
-16EXL-C, FX -16EYT-C
2N 2N
-2HC, FX -10PG, FX
3U 2N
Description
→ Chapter 20 "FX-16/32E*-*-
TB (Terminal Block)"
Applicable electric wire (UL-1061 are
Electric wire size
AWG28 (0.1mm
1.27 pitch, 20-core
9.2 Cable Connecting Procedures
-10GM, FX -20GM
2N 2N
Shape
• Single wire (Wire color : red)
• PLC side : A 20-pin connector
• Flat cables (with tube)
• A 20-pin connector at both
ends
• Round multicore cables
• A 20-pin connector at both
ends
• Flat cables (with tube)
• PLC side :
Two 20-pin connectors in 16-
point units
• Terminal block side :
A dedicated connector
• One common terminal covers
32 input/output terminals.
recommended) and tool
Pressure bonding tool
(made by DDK Ltd.)
2
357J-4674D: Main body
),
357J-4664N: Attachment
2
357J-5538
)
2
357J-13963
)
2
357J-5538
)
2
357J-13963
)