Table of Contents
Advertisement
FX
Series Programmable Controllers
3U
User's Manual - Hardware Edition
8.2
Installation location
Use the PLC under the environmental conditions complying with the generic specifications (Section 8.1).
• Keep a space of 50 mm (1.97") away between the unit main body and other devices and structure.
Install the unit as far away as possible from high-voltage lines, high-voltage devices and power equipment.
• To prevent temperature rise, do not install the PLC on a floor or a ceiling or in the vertical direction.
Install it horizontally on a wall as shown below.
• Arrange the extension cable in such a way that the left connectors of the input/output powered extension units/
blocks or special function units/blocks are connected on the side closer to the main unit.
8.2.1
Installation location in enclosure
Notes
8 Installation In Enclosure
8.2 Installation location
145
1
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
Troubleshooting
