Cleaning The Interior - Xerox WorkCentre 6655i User Manual

Cleaning the Feed Rollers and Separation Pad on the Automatic Document Feeder
1. Open the duplex automatic document feeder top cover.
2. With a clean, lint-free cloth moistened with water, wipe the feed rollers and the separation pad until
they are clean.
Note: If the duplex automatic document feeder feed rollers and separation pad get stained with
toner or debris, they can cause stains on the documents. To remove stains, use a soft lint-free cloth
dampened with a neutral detergent or water.
3. Close the document feeder top cover.

Cleaning the Interior

To prevent stains inside the printer that can deteriorate print quality, clean the interior of the printer
regularly. Clean the printer interior whenever you replace the drum cartridge.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before closing
the printer covers and doors.
• Remove any remaining pieces of paper or debris. For details, see
• Remove any dust or stains with a dry, clean cloth.
WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get burned. If
a sheet of paper is wrapped around the heat roller, do not try to remove it immediately. Switch off
the printer immediately and wait 40 minutes for the fuser to cool. Try to remove the jam after the
printer has cooled.
® ®
Xerox WorkCentre 6655/6655i Color Multifunction Printer
Clearing Paper Jams on page 220.
User Guide
Maintenance
193