Xerox WorkCentre 6655i User Manual page 241

Symptom
Partial blanks, creased paper, or
blotted printing
Cause
The paper is damp.
The paper is outside the
recommended specification
range.
Condensation inside the printer
causes partial blanks or creased
paper.
The toner cartridges are not
®
Xerox toner cartridges.
The paper is impeded in the
paper path.
®
Xerox WorkCentre
Solution
Replace the paper.
Replace the paper with a
recommended size and type, and
confirm that your control panel and
print driver settings are correct. For
details, see Supported Paper
54.
Turn on the printer and leave it on for
at least one hour remove the
condensation. For assistance, go to the
®
Xerox Support website at
www.xerox.com/office/WC6655suppor
t.
Replace the toner cartridges with
®
genuine Xerox toner cartridges. For
details, see Consumables
• Remove any paper or debris from
the paper path.
• Ensure that the paper trays are
closed.
• Ensure that the rear cover is closed
and locked.
®
6655/6655i Color Multifunction Printer
Troubleshooting
on page
on page 207.
241
User Guide