Copy And Scan Problems - Xerox WorkCentre 6655i User Manual

Troubleshooting

Copy and Scan Problems

If the copy or scan quality is poor, refer to the following table.
Symptoms
Lines or streaks present in copies only made
from the document feeder.
Spots present in copies taken from the
document glass.
The reverse side of the original is showing on
the copy or scan.
Image is too light or too dark.
If the problem persists, for online support information, go to www.xerox.com/office/WC6655support.
®
242 Xerox WorkCentre
User Guide
Solutions
There is debris on the document glass. When scanning, the paper
from the document feeder passes over the debris creating lines or
streaks. Clean all glass surfaces with a lint-free cloth.
There is debris on the document glass. When scanning, the debris
creates a spot on the image. Clean all glass surfaces with a lint-free
cloth.
Turn on Background Suppression.
• Copy: To lighten, darken, or adjust contrast, use the Image
Quality settings.
• Scan: To lighten, darken, or adjust contrast, use the Advanced
Settings Tab.
®
6655/6655i Color Multifunction Printer