Server Setup Options - Xerox Phaser EX7750 Configuration Manual

4

4-13 Server Setup options

If you make a mistake during Setup, use the Menu button to cancel without
N :
OTE
saving changes. Pressing Menu cancels what you are doing in the current screen to
bring you to the next higher-level menu. You may need to press Menu more than once
to return to the top level for the particular Setup in which you are working. Once at
the top level, you can enter a Setup menu again, or exit without making changes.
When you have entered the settings, you need to save the changes. You are usually
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you
choose No, your previous settings are retained. If necessary, the EX7750 restarts after
you exit from the Setup menu.
Server Setup options
The Server Setup menu lets you specify system information that pertains to the
EX7750 and all users. To access the menu, follow the instructions on
Exit Setup
Server Setup
Network Setup
Printer Setup
Setup
When you choose Server Setup, the options appear in sequence, as follows. Default
values, where applicable, appear in square brackets. Words shown in italics indicate
that a product- or site-specific value is displayed.
Server Name
Default server name
Enter a name for the EX7750 (up to 15 characters long). This name appears in the
Chooser on an AppleTalk network.
Do not use the device name (
N :
OTE
than one EX7750, do not give them the same name.
System Date
Enter the correct system date in the standard form for your use. The date appears on
the Job Log.
Press button for Server Setup
EX7550 ) as the server name. Also, if you have more
page 4-9.