Xerox Phaser EX7750 Configuration Manual page 85

4
4-25 Network Setup options
Network Setup
Service Setup
LPD Setup
Network Setup
Service Setup
PServer Setup
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup
LPD Setup options
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing. For more information, see
on TCP/IP networks" on page 2-17.
PServer Setup options
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the EX7750.
Choose NDS Setup if your network uses NetWare in native mode. Choose Bindery
Setup if your network uses NetWare in bindery emulation mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS
after Bindery, you will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare servers in bindery
emulation, note that the EX7750 cannot service NDS and bindery emulation
servers on the same NDS tree.
"Setting up the EX7750