Protocols - Xerox Phaser EX7750 Configuration Manual

5
5-10 Setting up the EX7750 from a Windows Computer

Protocols

You can change AppleTalk, IPX/SPX, and TCP/IP protocol settings for the EX7750.
These protocols work in conjunction with the Windows XP Local Area Connection
Properties Control Panel. When you click the Modify or Advanced button next to the
setting, the system opens the Local Area Connection Properties Control Panel, where
you complete the settings.
By default, the AppleTalk, IPX/SPX, and TCP/IP protocols are installed and enabled.
To disable a protocol, use the Windows Local Area Connection Properties Control
Panel from the FACI, or perform the EX7750 Setup from Command WorkStation or
Fiery WebSetup on a remote workstation.