Xerox Phaser EX7750 Configuration Manual page 182

7
7-8 Administering the EX7750
6. Select Restore system from the following menu.
Select Option:
Restore system
Restore/Update CD
Select Option:
Update system
Restore/Update CD
Select Option:
Exit
Restore/Update CD
7. When the following screen appears, make sure "Yes" is displayed, and then select OK.
The restore backup process begins immediately and takes approximately three
minutes.
All data will be
deleted. Continue?
Yes
Install XPe
Wait while the Control Panel displays screens indicating that the software is being
restored.
8. At the message "Restore complete!" select OK.
9. Scroll to Exit and select OK.
10. At the message "Remove CD and recycle power," remove the Restore/Update Server
Software CD from the DVD drive. Then, using the power switch on the back panel,
power off the system, wait 10 seconds, and then power the system back on.
Press the 4th line selection button
OK
Do not use Update in this procedure
OK
OK
OK Press the 4th line selection button