Xerox Phaser EX7750 Configuration Manual page 201

A
A-3 Troubleshooting
After this Setup screen
Enter First Letters
of Server Name
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
View Server List,
Edit Connection
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
Add File Server
(Network Setup>Service
Setup >PServer Setup >
Bindery Setup)
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup>Service
Setup > PServer Setup >
Bindery Setup)
Any Bindery Setup screen
This message
File server name not found.
Try again?
No file server is selected.
All connections used.
Remove server?
No NetWare print
server found.
Novell error code, followed by
a message.
In Network Setup, when you configure the IPX (Novell) connection, the EX7750
queries the network for Novell file servers and trees, and attaches to them temporarily.
If a guest login is enabled, it will be used. If not, you are prompted to log in from
Command WorkStation.
Means
No file server with those letters was found when EX7750
queried the network. Check the name of the NetWare file
server, check cable connections, and make sure the
NetWare server is turned on.
No file server has been added in Bindery Setup.
You have added the maximum number of bindery servers,
which is eight. You now have the option of disconnecting
one of those servers, so as to add another.
No print server was found when EX7750 queried the file
server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle EX7750 print
jobs (see "Configuring a NetWare server for printing"
page 2-10).
Novell NetWare has reported an error.
Command WorkStation reports the error number and
displays a brief message.
For the most common errors (listed in the following table),
a screen is displayed that allows you to retry the action that
evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell
administrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for
further explanation of Novell error codes.
on