Webtools - Xerox Phaser EX7750 Configuration Manual

3
3-4 Preparing for EX7750 Setup
Operator privileges
Operator control includes control of print jobs from the job management tools,
including the ability to override job settings.
Guest privileges (no password)
No password is needed for a user to log in as a Guest from the job management tools.
A Guest can view the status of active jobs but cannot make changes to jobs or to the
EX7750 state.

WebTools

The EX7750 can support Internet or intranet access from Windows and Mac OS
computers with WebTools. To enable use of WebTools, you must do the following in
Setup:
• Enable TCP/IP.
• Set an IP address, subnet mask, and gateway address for the EX7750.
• Enable Web Services.
• Enable 515 (LPD/Fiery Tools) option in Port Setup.
For more information, see
WebTools are not supported on Mac OS X.
N :
OTE
You can set passwords to control access to WebTools features. If you do not specifically
set these passwords, all users have access to all WebTools functions (see
page 3-3). WebTools include Status, WebLink, WebDownloader, WebSetup, and
Installer.
Status
The Status WebTool provides you with current information on the jobs processing and
printing on the EX7750. It is not affected by passwords. For more information, see the
Printing Guide.
Chapter 6.
"Passwords" on