Chapter 6: Configuring Webtools; Configuring The Ex7750 And Clients For Webtools - Xerox Phaser EX7750 Configuration Manual

6
6-1 Configuring the EX7750 and clients for WebTools
Chapter 6:
Configuring
WebTools
T
O SET UP
1. In EX7750 Network Setup, enable TCP/IP.
2. Set a valid, unique IP address for the EX7750, and then set the subnet mask.
3. Enable Web Services.
4. In EX7750 Printer Setup, confirm that the Print queue is published.
T
O SET UP
1. Enable TCP/IP networking.
2. Assign the workstation a valid, unique IP address and subnet mask, and a gateway
3. Install an Internet browser that supports the Java language and frames.
WebTools allow you to manage your EX7750 remotely from the Internet or from your
company's intranet. From the EX7750 home page, you can select a variety of
functions, including Status, WebLink, WebDownloader, WebSetup, and Installer.
For more information about using WebTools, see the
Configuring the EX7750 and clients for WebTools
WebTools provide access to many EX7750 functions via the Internet (or intranet),
providing additional flexibility in remote management. You can acces WebTools from a
Windows or Mac OS computer.
W T EX7750
EB OOLS ON THE
Set a gateway address, if required.
W T
EB OOLS ON A COMPUTER
address, if required.
Make sure Java is enabled. For more information about supported browsers and
WebTools requirements, see the
Printing
User Software Installation Guide.
Guide.