Xerox Phaser EX7750 Configuration Manual page 129

5
5-11 Network Setup
T
O CHANGE PROTOCOL SETTINGS FROM LOCAL
1. Click Modify or Advanced next to the setting.
The Windows XP Local Area Connection Properties Control Panel opens.
2. Click the General tab.
3. Select the protocol to modify.
Unless you have installed additional protocols, the choices are Efi Appletalk driver (for
AppleTalk), NWLink IPX/SPX/NetBIOS Compatible Transport Protocol (for
IPX/SPX), and Internet Protocol (for TCP/IP).
4. Click Properties and make your selections.
For more information, see your Windows documentation.
N :
OTE
5. Click OK to close the Properties dialog box.
6. Click OK to close the Local Area Connection Properties Control Panel.
AppleTalk
The current AppleTalk zone appears.
S
ETUP