Xerox Phaser EX7750 Configuration Manual page 68

4
4-8 Performing Setup from the Control Panel
Suspend Printing
Resume Printing
Secure Print
Shut Down
Clear Server
Run Setup
Suspend communication between the EX7750 and the printer.
Resume communication between the printer and the EX7750.
Allows users to control Secure Print jobs. To access Secure Print jobs, a password is
required. The password is defined and entered in the Secure Print option from the
Windows or Mac OS printer driver by the users. After selecting a Secure Print job
from a list, users have the following choices from the submenu that appears:
Print and Delete —Prints and deletes the Secure Print job immediately.
—Prints the Secure Print job immediately and holds a copy of the
Print and Hold
job as a Secure Print job. To print or delete this copy, its password is required
through this Secure Print command.
—Allows users to override the Copies print option setting in the
No. of Copies
printer driver. The default value is 1. If you do not access this option, the Copies
print option in the printer driver is effective.
—Deletes the Secure Print job without printing.
Delete
Secure Print jobs are not accessible from the job management tools.
N :
OTE
The Secure Print feature is not effective through the direct connection.
N :
OTE
Shut down all EX7750 activity in the correct manner and then restart. Use this
option instead of the power switch on the back of the EX7750. The following
options are available from the submenu that appears:
—Resets the server software but does not reboot the entire system.
Restart Server
Network access to the EX7750 is temporarily interrupted and all currently
processing jobs are aborted and might be lost.
—Shuts down all EX7750 activity properly.
Shut Down System
Reboot System —Shuts down and then reboots the EX7750.
Clear all jobs in all server queues, as well as all jobs archived on the EX7750 hard
disk, the index of archived jobs (in the Archive window), all FreeForm
the index of FreeForm masters (in the FreeForm window). Consult with your
administrator or operator before choosing Clear Server. If an Administrator password
has been set, you must enter it to access Clear Server.
Enter the Setup menu and change Setup option settings.
™
masters, and