Charging The Battery - Psion Teklogix WORKABOUT PRO M/C User Manual

Chapter 3: Getting To Know The WORKABOUT PRO

Charging The Battery

3.2.3 Charging The Battery

Important:
Lithium Ion battery packs must be charged before use. These batteries can be
charged with a variety of chargers and docking stations. These include:
• Desktop Docking Station (Model #WA4002) – operates as both a charger
and a docking station. Operating as a charger, both the battery installed in
the hand-held and a spare battery can be charged simultaneously.
• Quad Docking Station (Model #WA4004) – can charge the battery of up to
four WORKABOUT PROs inserted in the docking station.
• Single Battery Charger (Model #WA3001) – charges a single battery.
• Quad Battery Charger (Model #WA3004) – charges up to four spare Stan-
dard or High-Capacity WORKABOUT PRO battery packs.
It can take up to 5 hours to charge a battery. The WORKABOUT PRO's intelligent
charging system protects the battery from over-charging by terminating the charge
process when the battery is at maximum capacity.
Note: Refer to
for additional information about the battery.
Important:
24
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
FOR DETAILED INFORMATION about chargers and docking
stations, refer to Chapter 8: Peripheral Devices & Accessories
beginning on page 131.
For battery safety, refer to
tions" beginning on page 140.
"Monitoring The Battery And Maximizing Run Time"
To avoid damaging the battery, chargers will not begin the charge
process until the battery temperature is between 0˚ C to 45 ˚C
(32˚ F to 113˚ F).
"Lithium Ion Battery Safety Precau-
on page 35