Calibrating The Touchscreen; Resetting The Workabout Pro Hand-Held - Psion Teklogix WORKABOUT PRO M/C User Manual

To install ActiveSync, follow the step-by-step instructions provided with the
program's setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx

2.4 Calibrating The Touchscreen

Refer to "Calibrating The Touchscreen"

2.5 Resetting The WORKABOUT PRO Hand-Held

Important: Because Psion Teklogix cannot guarantee what has been saved
(registry) after a reset, this should be considered as a last resort.
To reset the unit:
• Press and hold down the <BLUE> key and the <ENTER/ON> key simulta-
neously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card may be preserved, but Psion
Teklogix cannot guarantee this.
Note: You do not need to reset your WORKABOUT PRO after configuring the
radio.
on page 30 for details.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 2: Basic Checkout
Calibrating The Touchscreen
17