Permitted Hosts Tab; Adding A Host - Psion Teklogix WORKABOUT PRO M/C User Manual

5.7.4 Permitted Hosts Tab

For security reasons, the Network Administrator may want to restrict SNMP-node
access to a known sub-set of SNMP Managers. This tab lists the IP addresses of all
the SNMP Managers which are allowed to monitor and manage this device. If no
entries are listed, the device will accept SNMP queries from any host.
5.7.4.1

Adding A Host

To add a new host:
Add
• Tap on the
• Type a new host IP address in the text box provided, and press <ENTER>.
Figure 5.48 Permitted Hosts Tab
button.
Figure 5.49 Adding A Host
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration

Permitted Hosts Tab

97