Display Backlight - Psion Teklogix WORKABOUT PRO M/C User Manual

Contrast
Sliding bar in the
Sliding the bar to the right to increases or lightens the display contrast.
5.5.1.2

Display Backlight

Display Properties
The dialogue box in the
of the backlight along with the duration of time it stays on after an event like a key
press or scanner trigger.
Note: Keep in mind that this option may be restricted to supervisory use only.
• In the Display Properties dialogue box, open the Backlight tab.
Note: Backlight changes take affect immediately. You do not need to reset
the WORKABOUT PRO.
Intensity
This parameter is used to adjust the light intensity of the backlight. Sliding the bar to
the left lowers the light intensity, and sliding it to the right raises the intensity.
Bright For
The value chosen from this dropdown menu determines the duration of time that the
backlight stays on at the configured intensity when a unit is not in use.
tab to the left decreases or darkens the display contrast.
Control Panel
Figure 5.4 Display Backlight Properties
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Chapter 5: Configuration
allows you to specify the intensity

Display Backlight

65