6.1 Installing The 802.11b Radio
The WORKABOUT PRO operates with an 802.11b Direct Sequence Spread
Spectrum radio. The CF (Compact Flash) card is easily installed in the unit.
•
To begin, remove the battery pack. If your unit is using AC power,
disconnect it.
•
Remove the stylus from the end-cap before removing the end-cap itself.
•
Remove the end-cap at the top of the WORKABOUT PRO – unscrew the
four Philips head screws from the cap.
End-Cap
Figure 6.1 The End-Cap And The SW1401 Power Switch
Chapter 6: Connecting To A LAN With 802.11b
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Installing The 802.11b Radio
SW1401 Power Switch
109