Post Installation - Psion Teklogix WORKABOUT PRO M/C User Manual

completed the driver installation and the device is no longer marked for
reinstall. Only one devnode per device can be 'unset' when the device
drivers are finally installed.
3. If you indicated that the usbstor driver should be installed, the same
steps as described above are carried out for usbstor except that the
WORKABOUT PRO must be running BooSt. (Press and hold down
the <SCAN> <BLUE> <ENTER> keys for a minimum of 6 seconds to
launch the BooSt program.) Keep in mind that a device running BooSt
has a different hardware ID than when it is running Windows CE .NET.
C.1.4 Post Installation
1. Done Dialogue Box:
This dialogue box indicates the success or failure of the installation.
• To view the log file, tap on the <Log File> button
• To exit the program, tap on the <Exit> button.
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
Appendix C: USB Setup Application

Post Installation

C-5