Indicators; The Led - Psion Teklogix WORKABOUT PRO M/C User Manual

• Select the Calibration tab, and then tap on the 'Recalibrate' button.
• Follow the directions on the calibration screen to calibrate the screen.
Note: The Stylus Properties dialogue box provides two additional tabs: Double-tap and
Options. The Double-Tap tab allows you to adjust the sensitivity of the dou-
ble-tap and the physical distance between taps. The Options tab allows you
to disable the touchscreen.

3.6 Indicators

The WORKABOUT PRO uses an LED (Light Emitting Diode), onscreen messages
and audio tones to indicate the various conditions of the hand-held, the batteries, the
scans and so on.

3.6.1 The LED

The WORKABOUT PRO is equipped with a single, dual-coloured LED. When the
<ENTER/ON> key is pressed, the LED flashes green to indicate that the unit has
been powered up.
Chapter 3: Getting To Know The WORKABOUT PRO
Figure 3.6 Calibration Screen
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual

Indicators

31