The Port Replicator - Psion Teklogix WORKABOUT PRO M/C User Manual

Chapter 8: Peripheral Devices & Accessories

The Port Replicator

If an unfused power source must be used, a fuse assembly (PN 19440) must be
added to the extension power cable (the fuse and instructions are supplied with the
cable). Use only a 10A slow blow UL approved fuse in the fuse assembly.

8.10.7 The Port Replicator

Figure 8.19 Port Replicator
The port replicator (Model# WA4005) is an optional accessory that allows tethered
devices as well as mounted peripherals (e.g., bar code printers or weigh scales) to be
attached to the vehicle cradle. The replicator can be used with or without the cradle
power option.
The functionality of the WORKABOUT PRO tether port is replicated into RS-232
serial interfaces by the port replicator. It provides the user with 3 DB9 serial
interfaces as well as one Type B USB port (for connecting a Host device).
161
Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual