Aux Mode Path - Outback Power Systems MX60 Installation, Programming, And User's Manual

AUX MODE Path

*Charger Aux Light
EQ Misc Advance
Logging Log2
EXIT GO
PASSWORD
***150***
ENTER - +
• Press the #1 soft key once from the STATUS Menu to open the MAIN Menu.
• Press either of the arrow soft keys until the "*" is to the left of "Aux. "
• Press the <GO> soft key. If more than ten minutes have passed since any activity, the PASSWORD
screen becomes active, requiring the user to input the 141 PASSWORD and press< ENTER>. This
screen will also appear after fi rst booting up the MX60 even though the password was entered
when setting the battery voltage.
AUX MODE
Vent Fan
Off
EXIT NEXT VOLT
AUX MODE
ERROR ALARM
On
EXIT NEXT
AUX MODE
Remote
Off
EXIT NEXT
OutBack Power Systems Inc.
Charger *Aux Light
EQ Misc Advance
Logging Log2
EXIT GO
AUX MODE
Manual
Off
EXIT NEXT ON OFF
AUX MODE
PV Trigger
Off
EXIT NEXT TIME VOLT
AUX MODE
Diversion
Off
EXIT NEXT TIME VOLT
PV 005 V Bat 12.5 V
00.0 A 00.0 A
Watts 0000 Aux Off
kWHrs 00.0 Sleeping
AUX MODE
Manual
On
EXIT NEXT ON OFF
AUX MODE
Float
Off
EXIT NEXT
AUX MODE
Low Batt Disconnect
On
EXIT NEXT TIME VOLT
23