Battery System Voltage - Outback Power Systems MX60 Installation, Programming, And User's Manual

BATTERY SYSTEM VOLTAGE

• The MX60's default setting is for a 12 VDC battery.
• Change the setting after powering up the MX60 if a diff erent battery voltage is used.
• The PV array voltage—which must not exceed 150 VDC open circuit—is automatically detected.
KEY TO THE EXAMPLE DIAGRAMS
Soft keys:
(#1) (#2) (#3) (#4)
Solid black indicates key is to be pressed:
Down arrow will lead to the next screen:
Up arrow points to one or more keys that will change a value:
The keys correspond to any text immediately above them.
14
OutBack Power Systems Inc.