2-11 Sata Connections; S-Sata 3.0 Connections - Supermicro X10DSC+ User Manual

2-11 SATA Connections

S-SATA 3.0 Connections

Four S-SATA 3.0 connections are located on the motherboard. S-SATA (0-3) ports
are supported by the Intel PCH chip. In addition, S-SATA 0/1, colored in yellow, are
used with Supermicro SuperDOM (Disk-on-Module) connectors with power-pins
built in. The SuperDOM connectors are backward-compatible with regular SATA
HDDs and SATA DOMs. All SATA ports provide serial-link signal connections,
which are faster than the connections of Parallel ATA.
Note 1
power pins built in and do not require separate external power cables.
These connectors are backward-compatible with non-Supermicro SATA-
DOMs that require an external power supply.
Note 2: For more information on the SATA HostRAID configuration, please
refer to the Intel SATA HostRAID user's guide posted on our website @
http://www.supermicro.com..
HDD_LED1
LED2
JF1
D
A B
JSD2
JSD1
C
JBAT1
BIOS
Battery
S-SGPIO1
PCH
JTPM1
:
Supermicro SuperDOMs are yellow SATADOM connectors with
USB0/1(3.0)
UID
LED1
BMC
IPMI_LAN
BMC_HB_LED1
CPU2
1
X10DSC+
REV:1.01
BIOS
JPW3
IPMI CODE
LICENSE
BAR CODE
VGA COM1
CPU2_MEMORY_LED CPU1_MEMORY_LED
CPU1 SIOM
CPU1
1
JITP1
CPU-XDP
2-41
Chapter 2: Installation
A. S-SATA0
B. S-SATA1
C. S-SATA2
D. S-SATA3
PCI-E 3.0 X16
JPW2
JPW1