Motherboard Features - Supermicro X10DSC+ User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
I/O Devices
•
Dual Intel® E5-2600v3/v4 Series processors (Socket
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Note 1: Both CPUs need to be installed for
full access to the PCI-E slots, DIMM slots, and
onboard controllers. Refer to the block diagram
on page 1-10 to determine which slots or de-
vices may be affected.
Notes 2: E5-2600v4 requires Revision 2.0
BIOS (or higher).
•
Integrated memory controller supports up to 3072
GB of Load Reduced (LRDIMM), Registered
(RDIMM) or Non-volatile (NV-DIMM) DDR4 (288-pin)
ECC 2400 MHz (max.) in 24 slots
Note 1: Memory speed support depends on
the processors used in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM Sizes
•
DIMM Up to 128GB at 1.2V
•
Intel® PCH C612
•
Two (2) PCI-Express 3.0 x16 slots (CPU2 PCI-E
Slots 2/3),
•
One (1) PCI-Express 3.0 x8 slot (CPU2 PCI-E Slot 1)
•
One (1) PCI-Express 3.0 x16 slot from CPU1 for
SIOM support (CPU1 SIOM PCI-E slot)
•
One (1) PCI-Express 3.0 x8 Add-On-Module (AOM)
slot from CPU1 for mezzanine card support (CPU1
JMEZZ1 PCI-E slot)
•
Graphics controller via ASpeed AST2400 BMC
•
ASpeed AST2400 Baseboard Controller (BMC) sup-
ports IPMI 2.0
SATA/SAS Connections
•
SATA 3.0
1-7
Chapter 1: Overview
Four (4) SATA 3.0 ports (2 SATA
+ 2 DOMs) supported by Intel
PCH (S-SATA 0-3)