2-11 Sata Drive Connections; Sata Ports; Sas Ports - Supermicro H8QG7-LN4F User Manual

2-11 SATA Drive Connections

SATA Ports

There are no jumpers to configure
the SATA ports, which are designated
SATA0 through SATA5. See the table
on the right for pin defi nitions.

SAS Ports

There are eight SAS ports included
on the H8QG7-LN4F serverboard
only. See the table on the right for pin
defi nitions.
Note: JPS1 must be set correctly to
enable the SAS controller.
SATA Ports Pin Defi nitions
(SATA0-SATA3)
Pin# Defi nition
1 Ground
2 TXP
3 TXN
4 Ground
Pin Defi nitions
(SAS0 ~ SAS
Pin# Defi nition
1 Ground
3 TXN
5 RXN
7 Ground
2-25
Chapter 2: Installation
Pin# Defi nition
5 RXN
6 RXP
7 Ground
SAS Ports
7)
Pin# Defi nition
2 TXP
4 Ground
6 RXP