Super Io Configuration - Supermicro X10DSC+ User Manual

Table of Contents

PCI Devices Option ROM Settings

CPU2 PCI-E 3.0x8 Slot1 OPROM/CPU2 PCI-E 3.0x16 Slot2 OPROM/CPU2

PCI-E 3.0x16 Slot3 OPROM/CPU1 SAS AOM1 (Add-On Module#1) Slot4

OPROM/CPU1 SIOM Card Slot5 OPROM

Select Enabled to enable Option ROM support to boot the computer using a de-

vice installed on the slot specified by the user. The options are Disabled, Legacy,

and EFI.

Onboard NVMe1 Option ROM/Onboard NVMe2 Option ROM/Onboard Video

Option ROM

Select Enabled to enable Option ROM support to boot the computer using a de-

vice installed on the slot specified by the user. The options are Disabled and EFI.

VGA Priority

Use this item to select the graphics device to be used as the primary video display

for system boot. The options are Onboard and Offboard.

Onboard LAN1 Option ROM/Onboard LAN2 Option ROM

Use this option to select the type of device installed in LAN Port1 or LAN Port2

for system boot. The default setting for LAN1 Option ROM is PXE, and for LAN2

Option ROM is Disabled.

Network Stack

Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Uni-

fied Extensible Firmware Interface) for network stack support. The options are

Enabled and Disabled.

IPv4 PXE Support (Available when Network Stack is set to Enabled)

Set this item to Enabled to activate IPv4 PXE Support. The options are Enabled

and Disabled.

IPv6 PXE Support (Available when Network Stack is set to Enabled)

Set this item to Enabled to activate IPv6 PXE Support. The options are Enabled

and Disabled.