Supermicro X10DSC+ User Manual page 14

X10DSC+ Motherboard User's Manual
(BP) USB 0/1 (3.0)
USB 2 (3.0)
VGA
LED
BMC_HB_LED1
HDD_LED1
LED1
LED2
LED
LED_A1-A3 CPU1_Memory_Fault_LED for DIMMs A1-A3
LED_B1-B3 CPU1_Memory_Fault_LED for DIMMs B1-B3
LED_C1-C3 CPU1_Memory_Fault_LED for DIMMs C1-C3
LED_D1-D3 CPU1_Memory_Fault_LED for DIMMs D1-D3
LED_E1-E3 CPU2_Memory_Fault_LED for DIMMs E1-E3
LED_F1-F3 CPU2_Memory_Fault_LED for DIMMs F1-F3
LED_G1-G3 CPU2_Memory_Fault_LED for DIMMs G1-G3
LED_H1-H3 CPU2_Memory_Fault_LED for DIMMs H1-H3
Note: For SAS support, be sure to use an SMC-proprietary mezzanine
card. Install the mezzanine card (AOM-S3108M-H8L) with the LSI 3108
controller built-in on the (CPU1) JMEZZ1 PCI-E slot for SAS 3.0 support.
Refer to Section 1-8 and Section 2-6 for more information.
Warning! To avoid damaging the power supply or the motherboard, be sure to use
a power supply that contains a 24-pin and two 8-pin connectors. Be sure to connect
the 24-pin power connector at JPW1, and the 8-pin power connectors at JPW2/JPW3
located on the motherboard to your power supply. Failure to do so may void the manu-
facturer warranty on your power supply and motherboard.
Backpanel USB 3.0 ports 0/1
Type A USB 3.0 connection header for front access (USB 2)
Backpanel VGA port
X10DSC+ Onboard LED Indicators
Description
BMC Heartbeat LED
HDD LED
Rear UID LED
Power LED
X10DSC+ Memory LED Indicators
Description
1-6
State
Green: Blinking BMC Normal
Green: On HDD Normal
Blue: On Unit Identified
On Power On
State
Red: On Memory Failure
Red: On Memory Failure
Red: On Memory Failure
Red: On Memory Failure
Red: On Memory Failure
Red: On Memory Failure
Red: On Memory Failure
Red: On Memory Failure
Status
Status