Supermicro X10DSC+ User Manual page 13

Jumper
JBT1 Clear CMOS/Reset BIOS Configuration
JPB1 BMC Enable
JPG1 VGA Enable
JPME2 Manufacture (ME) Mode Select
JWD1 Watch Dog Timer Enable
Connectors
Battery (JBAT1)
COM1
FAN1-FAN5
JF1
JI C_EXP1/2
2
JI C_FP1
2
JIPMB1
JL1
JNVI C1/2
2
JPI C1
2
JPW1
JPW2/3
JSD1/JSD2
JTPM1
IPMI_LAN
P1_NVMe#0-#3
SP1
S-SATA 0-3
S-SGPIO 1
(CPU2) Slot1
(CPU2) Slot2/3
(CPU1) JMEZZ1 PCI-E
(CPU1) SIOM PCI-E
UID (JUIDB2)
X10DSC+ Jumpers
Description
X10DSC+ Connectors
Onboard CMOS battery (See Chpt. 3 for Used Battery Disposal)
Backplane COM Port1
CPU/system fan headers (Fan 1-Fan 5)
Front panel control header
System Management Bus (SMBus) I
System Management Bus (SMBus) I
4-pin external BMC I C header (for an IPMI card)
2
Chassis intrusion header
System management bus (SMBbus) (I
Power supply SMBbus I
24-pin ATX main power (See Warning on Pag. 1-6)
12V 8-pin power connectors (See Warning on Pg. 1-6.)
SATA DOM (Device on Module) power connectors 1/2
TPM (Trusted Platform Module)/Port 80 header
IPMI_dedicated LAN support by the ASpeed AST2400 controller
NVM Express PCI-E 3.0 x4 ports (ports #0 - #3) supported by CPU1
Internal speaker/buzzer
SAS 3.0 connections (0-3) supported by Intel PCH (S-SATA 1/2 support
SMCI SuperDOM w/power pins built-in)
Seria_Link General Purpose I/O header 1 for S-SATA ports
PCI-Express 3.0 x8 slot from CPU2
PCI-Express 3.0 x16 slot from CPU2
PCI-Express 3.0 x8 Add-On-Module (AOM) slot from CPU1 for mezzanine
card support (See the note on Pg. 1-6)
PCI-Express 3.0 x16 slot from CPU1 for SMCI SIOM add-on module support
UID (Unit Identification) switch
1-5
See Chapter 2
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Normal)
Pins 1-2 (Reset)
Description
C for SAS3 backplanes
2
C for LCD devices
2
C) for NVME devices
2
C header
2
Chapter 1: Overview
Default Setting