Onboard Power Led; Hdd Led - Supermicro X10DSC+ User Manual

Onboard Power LED

The Onboard Power LED is located at
LED2 on the motherboard. When this
LED is on, the system is on. Be sure to
turn off the system and unplug the power
cord before removing or installing com-
ponents. See the tables at right for more
information.

HDD LED

An HDD LED indicator, located at HDD_
LED1 on the motherboard, indicates the
status of onboard hard drive disks includ-
ing SATA devices. When HDD_ LED1 is
blinking, all onboard HDDs are function-
ing normally. See the table at right for
more information.
Note: Refer to Page 2-22 for information on the rear UID LED (LED1).
B
HDD_LED1
A
LED2
JF1
JSD2
JSD1
JBAT1
BIOS
Battery
S-SGPIO1
PCH
JPW3
JTPM1
VGA
USB0/1(3.0)
UID
LED1
BMC
IPMI_LAN
CPU2_MEMORY_LED CPU1_MEMORY_LED
BMC_HB_LED1
CPU2
1
X10DSC+
REV:1.01
BIOS
IPMI CODE
LICENSE
BAR CODE
2-39
Onboard PWR LED Indicator
LED States
LED Color Definition
Off System Off (PWR cable
not connected)
Green System On
HDD LED Indicator
Color/State
Green:
Blinking
COM1
CPU1 SIOM PCI-E 3.0 X16
CPU1
1
JITP1
JPW2
CPU-XDP
JPW1
Chapter 2: Installation
LED States
Definition
HDDs: Normal
A. PWR LED
B. HDD LED