Boot Configuration - Supermicro X10DSC+ User Manual

Boot Configuration

Setup Prompt Timeout
Use this item to enter the number of seconds for the system to wait for the setup
activation key before entering the Setup utility. Enter 65535 (0xFFFF) to wait
indefinitely.
Boot Mode Select
Use this item to select the type of device to be used for system boot. The options
are Legacy, UEFI, and Dual.
Fixed Boot Order Priorities
This option prioritizes the order of bootable devices from which the system will boot.
Press <Enter> on each entry from top to bottom to select devices.
When the item above -"Boot Mode Select" is set to Dual (default), the following
items will be displayed for configuration:
•
Boot Option #1 - Boot Option #15
When the item above -"Boot Mode Select" is set to Legacy, the following items will
be display for configuration:
•
Boot Option #1 - Boot Option #7
When the item above -"Boot Mode Select" is set to UEFI, the following items will
be display for configuration:
•
Boot Option #1 - Boot Option #8
 Add New Boot Option
Use this item to select a new boot device to add to the boot priority list.
Add New Boot Option
Use this feature to select the target boot device to add to the boot priority list.
Path for Boot Option
Use this feature to create a new path for boot option.
Boot Option File Path
Use this feature to set a new file path for boot option.
Create
Use this feature to create a new boot option for the new device.
4-37
Chapter 4: AMI BIOS