Memory Configuration; Dimm Information - Supermicro X10DSC+ User Manual

X10DSC+ Motherboard User's Manual
Isoc Mode
Select Enable for Isochronous support to meet QoS (Quality of Service) require-
ments. This feature is especially important for Intel's Virtualization Technology.
The options are Enable and Disable.
Memory Configuration
This submenu allows the user to configure Integrated Memory Controller (IMC)
settings.
Enforce POR
Select Enabled to enforce POR restrictions on DDR4 frequency and voltage
programming. The options are Enabled and Disabled.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory
modules. The options are Auto, 1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, and 2400.
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are Auto, Disabled and Enabled.
DRAM RAPL (Running Average Power Limit) Baseline
Use this feature to set the run-time power-limit baseline for DRAM modules. The
options are Disable, DRAM RAPL Mode 0, and DRAM RAPL Mode 1.
Set Throttling Mode
Throttling improves CPU reliability and reduces power consumption via automat-
ic-voltage control during CPU idle states. The options are Disabled and CLTT
(Closed Loop Thermal Throttling).
A7 Mode
Select Enable to support A7 (Addressing) mode to improve memory performance.
The options are Enable and Disable.
DIMM Information
This item displays the status of a DIMM module as detected by the AMI
BIOS.
•
P1 DIMMA1 ~ P2 DIMMH3
4-14