User Level - Panasonic WJ-ND400K Setup Instructions

User level

Assign a level (LV1/LV2/LV3/LV4) to every user to restrict operable functions.
1
Click the [User mng.] button.
2
Click the [User level] tab.
The "User level" page will be displayed.
Functions that can be restricted
The following functions can be restricted according to the user levels.
Function
Setup
Quick
Camera
Server
Network
User mng.
Maintenance
Camera control
76
Settings Description
*1*2
Checked / It is possible to display the setup menu and edit the settings
*3*4
Unchecked on the setup menu on the following pages: "Basic",
"Emergency rec.", "Event", "Schedule", "Config."
*1
Checked / It is possible to edit the settings on the "Quick" page.
*2*3*4
Unchecked
*1
Checked / It is possible to edit the settings on the "Camera" page.
*2*3*4
Unchecked
*1*2
Checked / It is possible to edit the settings on the "Server" page.
*3*4
Unchecked
*1*2
Checked / It is possible to edit the settings on the "Network" page.
*3*4
Unchecked
*1
Checked / It is possible to edit the settings on the "User mng." page.
*2*3*4
Unchecked
*1
Checked / It is possible to edit the settings on the "Maintenance"
*2*3*4
Unchecked page.
*1*2*3
Checked / It is possible to pan/tilt the camera.
*4
Unchecked
3
Configure each setting item.
4
Click the [Set] button.
Note:
• Each parameter of user level in the default setting is
as follows:
LV1: Possible to perform all the operations
(Administrator)
LV2: Possible to display the settings of the recorder
and the access log, and to reset the alarm
LV3: Possible to monitor live images or play record-
ed images
LV4: Possible to monitor live images