[Setup] Button - Panasonic WJ-ND400K Setup Instructions

[Setup] button

The following operation panel will be displayed when
the [Setup] button is clicked.
q [Quick] button
Displays the "Quick" page that contains the mini-
mum required settings to be configured to operate
the recorder.
w [Basic] button
Displays the "Basic" page that contains the basic
system settings and the time & date settings.
e [Emergency rec.] button
Displays the "Emergency rec." page that contains
the settings relating to the emergency recording.
20
r [Event] button
Displays the "Event" page that contains the settings
relating to the event actions to be taken at an event
occurrence for each event type (site alarm, terminal
alarm, command alarm).
t [Schedule] button
Displays the "Schedule" page that contains the set-
tings relating to the schedule recording and the
event action.
y [Camera] button
q
Displays the "Camera" page that contains the net-
work settings of cameras, and the settings relating
w
to the group and the sequence display.
e
u [Server] button
r
Displays the "Server" page that contains the set-
tings of the NTP server, FTP server, mail server and
t
proxy server.
y
i [Network] button
u
Displays the "Network" page that contains the net-
work settings.
i
o
o [User mng.] button
Displays the "User mng." page that contains the
!0
settings relating to authentication.
!1
!0 [Maintenance] button
Displays the "Maintenance" page that contains the
!2
information display pages (about the recorder, disk
and network), and the settings relating to the hard
disk drives and saving/loading of the settings.
!1 [Config.] button
Displays the "Disk config." page that contains the
disk partition information display page, the settings
relating to formatting of the hard disk drives.
Important:
• When any of edited settings are applied, all login
users will forcibly be logged out.
!2 [Help] button
The "Help" page will be displayed.