Setting Of Operation Level [User Level] - Panasonic WJ-HD616/1000 Installation Manual

Setting of operation level [User level]
Select the [User level] tab on the "User mng." page. (+ Page 60)
A level (LV 2/LV 3) can be assigned to every user to restrict operable functions on this tab. To forbid user to operate, leave it
blank. It is impossible to change the setting for LV1.
Refer to the diagram for further information about each function.
Note:
• Available functions for each user level are as follows:
LV1: Possible to perform all the operations (Administrators)
LV2: Possible to perform a part of the settings of the recorder and alarm reset (Head of operators)
LV3: Possible to monitor or play the images (Operators)
• The screenshot shows the default.
Functions that can be restricted
The following functions can be restricted according to the user levels.
Function
Setup
Quick
Server
Network
User mng.
Maintenance
Camera control
Alarm reset
Error reset
Alarm suspend
Copy
Manual rec. operation
Playback operation
112
Description
Setup menus can be displayed and the settings can be configured.
The "Quick" page is displayed and the settings can be configured.
The "Server" page is displayed and the settings can be configured.
The "Network" page is displayed and the settings can be configured.
The "User mng." page is displayed and the settings can be configured.
The "Maintenance" page is displayed and the settings can be configured.
Camera control such as panning and tilting can be performed. (☞ Operating Instructions (PDF))
An alarm action can be canceled. (☞ Operating Instructions (PDF))
An error action can be canceled. (☞ Operating Instructions (PDF))
An alarm action can be suspended. (☞ Operating Instructions (PDF))
A recorded image can be manually copied. (☞ Operating Instructions (PDF))
Manual recording can be started and stopped. (☞ Operating Instructions (PDF))
A recorded image can be played back. (☞ Operating Instructions (PDF))